Generally, there are nine steps to complete the entire operation.
The step orders and corresponding details have been demonstrated as the table below.
The step orders and corresponding details have been demonstrated as the table below.
Step Number | Specific Operation |
1 | Insert the intake pipe and screw the nut. |
2 | Insert and tighten the outlet pipe. |
3 | Open the cap and place the cap under the outlet pipe. |
4 | Adjust the liquid volume from “0” to a corresponding value on the rotating scale. |
5 | Exhaust process
Ensure that the outlet pipe cap is opened, and then lift the piston for a distance with continuous pressing.
Repeat the former step once or twice, and stop when bubbles are completely eliminated.
|
6 | Prepare the liquid separation after the exhaust process.
If there is still not an entire process, please check whether the pipette or other valves have been installed correctly.
|
7 | The operation is exactly the same as the instruction in step four. |
8 | After use press the piston to the bottom first, and then adjust the dial to “0” scale to lock the bottle-top dispenser. |
9 | Transfer process
Stably lift the piston to the highest place, and press the piston to the bottom, which serves as complete separation.
|
没有评论:
发表评论