The Operating Steps of Bottle-Top Dispenser

The specific operation methods of the bottle-top dispenser are as follows:
1. Insert the intake pipe and tighten the nut.
2. Insert and tighten the drain pipe.
3. Open the cap and place the cap under the drainage pipe.
4. Adjust the volume of liquid separation from zero to corresponding value by rotating scale.
5. Exhaust process:
Make sure that the cover of the drain pipe is opened and the piston is lifted a certain distance. Then press down and repeat the step 1-2 times. Stop when the bubble is completely eliminated through the observation window.
6. Prepare for liquid separation after exhaust. (Note: If the exhaust has not been completely exhausted, please check whether the suction pipe or other valves are installed correctly.)
7. Adjust the volume of liquid separation from zero to corresponding value by rotating scale.
8. After use, first press the piston to the bottom, then adjust the knob to zero scales and lock the bottle mouth distributor.
9. Transfer process: lift the piston stably to the top, then press the piston equally stable to the bottom, so as to complete a liquid separation process.

The Operating Steps of Bottle-Top Dispenser