The Operation Steps of Syringe Filter

Preparations of Syringe Filter

(1)After the filter core and shell are thoroughly cleaned and sterilized, the filter is installed.
(2) After the installation of the Syringe Filter, the whole filtration system must be thoroughly flushed with clean water.
(3) After the whole filtration system is washed out, the filtration operation can be carried out.

Filtration and cleaning operation in production process

Open the exhaust valve, and slowly open the feed valve, introduce the material to be filtered. When the material flow out of the outlet of the exhaust valve, immediately close the exhaust valve, and slowly open the discharge valve.

In the initial stage of filtration, because the Syringe Filter element is still very clean and the filtering speed is very fast, the pressure in the filter is generally maintained at 0.05-1 Mpa. With the passage of time, the pressure in the filter can be gradually increased in order to maintain proper filtration rate. However, the maximum pressure in the filter cannot exceed the maximum operating pressure allowed by the filter element of different materials.

The Operation Steps of Syringe Filter