The laboratory 3-branches vacuum filtration system uses an innovative design, which can be connected to 3 funnels to filter 3 groups of samples at the same time, which is suitable for users with a large amount of detection. The filter bracket is made of anodized aluminum alloy as a whole, which is sturdy and durable, lightweight, and can be autoclaved. The suction filter pump adopts an oil-free design, which can be directly connected to the power supply, with low noise and low vibration. With double anti-waste liquid back suction protection design and can completely eliminate back suction phenomenon.
The laboratory 3-branches vacuum filtration system is suitable for filtration with a large number of sample treatments such as SS filtration of suspended solids, microbial limit inspection filtration.
Uses: laboratory 3-branches stainless steel vacuum filtration device is made of 316L microbial stainless steel, which is suitable for using the membrane filtration method in the laboratory to detect indicators of microorganisms and suspended solids in water.
Assembly:
1. Take out each part of the BV-330-B laboratory 3-branches stainless steel vacuum filtration device-the filter base, suction filter, and waste liquid bottle, and remove the packaging and place it on a horizontal table.
2. Please connect the suction end of the vacuum pump to the suction end of the waste liquid bottle with a pump tube with a water blocking filter, and the connection of the suction end of the waste liquid bottle is the end with a water blocking protector below.
3. Please connect the inlet end of the waste liquid bottle and the interface end of the 3-branches stainless steel filter base with a silicone tube.
4. Make sure that all silicone tube connections are completely sealed.
1. Take out each part of the BV-330-B laboratory 3-branches stainless steel vacuum filtration device-the filter base, suction filter, and waste liquid bottle, and remove the packaging and place it on a horizontal table.
2. Please connect the suction end of the vacuum pump to the suction end of the waste liquid bottle with a pump tube with a water blocking filter, and the connection of the suction end of the waste liquid bottle is the end with a water blocking protector below.
3. Please connect the inlet end of the waste liquid bottle and the interface end of the 3-branches stainless steel filter base with a silicone tube.
4. Make sure that all silicone tube connections are completely sealed.
没有评论:
发表评论