Pipette is often used in the laboratory to remove small or trace amounts of liquid. The specifications are different. The pipettes of different specifications use different sizes of the tip, and the shapes produced by different manufacturers are slightly different. , But the working principle and operation method are basically the same. The pipette is a precision instrument. Be careful when using and storing it to prevent damage and avoid affecting its range.
The pipette first appeared in 1956 and was invented by Schnitger, a scientist of the German Institute of Physiology and Chemistry. After that, in 1958, the German company began to produce push-button micro-samplers, becoming the first company in the world to produce micro-samplers. These micropipettes have a liquid absorption range of 1-1000 μl and are suitable for clinical routine chemistry laboratory use. The micro-sampler has been developed to this day. Not only is the sample addition more accurate, but also a variety of varieties, such as micro-dispensers, multi-channel micro-samplers, etc., the physical principles of sample addition are as follows: ① using air Pad (also known as piston stroke) for sample loading; ② using a piston without air pad is moving sample loading. The two different principles of the micro-sampler have different specific applications.
The pipette is a device used in the laboratory for the removal of a small/trace amount of liquid. The pipette is a precision instrument, which should be taken care of during use and storage to avoid damage. According to the operating method, the pipette falls into types: the mechanical and the electronic. However, mechanical pipettes are more commonly used than electronic ones.
Auxiliary Consumable of Pipette
The pipette is usually used with pipette rack and pipette head.
Pipette rack: the pipette can be hung on it, and there are only two types of pipette tacks: linear and round, both of which can be mounted with 6 pipettes.
The pipette is usually used with pipette rack and pipette head.
Pipette rack: the pipette can be hung on it, and there are only two types of pipette tacks: linear and round, both of which can be mounted with 6 pipettes.
Pipette head: different ranges of the nozzle head have different colors. Some of the nozzle heads have a filter cartridge that aims to avoid the pipette contaminated by the sample. There are three categories of gun heads: Advanced Pipette tips(imported), Standard Pipette Tips(domestic) and advanced Filter Pipette Tips(come with filter cartridge). All of them are made of PP.
没有评论:
发表评论